Jump to content

VAXBI bus

From Wikipedia, the free encyclopedia
VAXBI
VAX Bus Interconnect
VAX ECC memory card with VAXBI interface highlighted
Year created~1986; 39 years ago (1986)
Created byDigital Equipment Corporation
Width in bits32
VAX BI to Unibus adapter.
Ethernet and tape drive controller

VAXBI (VAX Bus Interconnect) is a computer bus designed and sold by the Digital Equipment Corporation (DEC) of Maynard, Massachusetts.[1]

The bus is an advanced, configuration-free synchronous bus used on DEC's later VAX computers.[2] Like the Unibus and Q-Bus before it, it uses memory-mapped I/O[3] but has 32-bit address and data paths. The VAXBI is a multiplexed bus with fully distributed arbitration and geographic addressing.[4]

All of the logic required to implement a VAXBI interface is contained within a single custom integrated circuit (the "BIIC") and the physical layout and printed wiring board layout for compliant cards is tightly specified, right down to the location of the dual amber status LEDs that are required. The portion of the card that is reserved for the bus interface is referred to as "the VAXBI corner".[5] VAXBI licensees were given the appropriate engineering drawings to allow them to exactly replicate a compliant card.[6]: 50 

VAXBI expansion cards mount into backplanes using a ZIF connector; depending on the backplane design, cards can be loaded from the top or the front side of the backplane. No cable connections are permitted on the cards; all connections are made via three uncommitted rows of backplane connectors. Similarly, no configuration jumpers are permitted on the cards; all setup is done by jumpers inserted on the backplane connectors or via software configuration.[2]

Originally conceived by its engineers to be an open bus, it was forced to be a tightly licensed bus by Digital's marketing and management, and was not nearly as successful as had originally been hoped for.[7]

It is used in the VAX 6000, VAX 8000 (82xx, 83xx, 85xx, 87xx, 88xx models)[8] and the VAX 9000 systems and also on the MIPS R3000 based DECsystem 5800 series.

A PDP-11 implementation (the PDP-11/27) was envisioned but never advanced beyond the concept stage.

References

[edit]
  1. ^ Di Giacomo 1990, p. 4.4.
  2. ^ a b Di Giacomo 1990, p. 4.9.
  3. ^ Shah 1991, p. 281.
  4. ^ Di Giacomo 1990, p. 4.9, 4.19.
  5. ^ VAXBI Designer's Notebook (PDF). Digital Equipment Corporation. January 1986.
  6. ^ Wilson, David (March 1986). "BI Bus Boosts Performance Of VAX Systems". Digital Design. 16 (3). UBM Information: 46–50 – via Gale.
  7. ^ Simpson, David (December 21, 1992). "DEC, MTI end bitter licensing dispute". Digital News & Review. 9 (24). Reed Business Information: 1 et seq. – via Gale.
  8. ^ Shah 1991, p. 2.

Works cited

[edit]

Further reading

[edit]